28smd

I/SO MCU FLASH USB SMD 16 BIT

Referencia: SMPIC18F2550

Ideal for low power (nanoWatt) and connectivity applications that benefit from the availability of three serial ports: FS-USB (12 Mbit/s), I²C⢠and SPI⢠(up to 10Mbit/s) and an asynchronous (LIN capable) serial port (EUSART). Large amounts of RAM memory for buffering and Enhanced FLASH program memory make it ideal for embedded control and monitoring applications that require periodic connection with a (legacy free) Personal Computer via USB for data upload/download and/or firmware updates. While operating up to 48 MHz, the PIC18F2550 is also mostly software and hardware compatible with the PIC16C745 Low-Speed USB OTP devices. THE PICSTART® Plus does NOT currently support this device but may support it in the future.

Features 
Full Speed USB 2.0 (12Mbit/s) interface
  • 1K byte Dual Port RAM + 1K byte GP RAM
  • Full Speed Transceiver
  • 16 Endpoints (IN/OUT)
  • Internal Pull Up resistors (D+/D-)
  • 48 MHz performance (12 MIPS)
  • Pin-to-pin compatible with PIC16C7X5
Parameter Name  Value
 Program Memory Type  Flash
 Program Memory (KB)  32
 CPU Speed (MIPS)  12
 RAM Bytes  2,048
 Data EEPROM (bytes)  256
 Digital Communication Peripherals  1-A/E/USART, 1-MSSP(SPI/I2C)
 Capture/Compare/PWM Peripherals  2 CCP
 Timers  1 x 8-bit, 3 x 16-bit
 ADC  10 ch, 10-bit
 Comparators  2
 USB (ch, speed, compliance)  1, Full Speed, USB 2.0
 Temperature Range (C)  -40 to 85
 Operating Voltage Range (V)  2 to 5.5
 Pin Count  28
6,55 €
7,93 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

Ideal for low power (nanoWatt) and connectivity applications that benefit from the availability of three serial ports: FS-USB (12 Mbit/s), I²C⢠and SPI⢠(up to 10Mbit/s) and an asynchronous (LIN capable) serial port (EUSART). Large amounts of RAM memory for buffering and Enhanced FLASH program memory make it ideal for embedded control and monitoring applications that require periodic connection with a (legacy free) Personal Computer via USB for data upload/download and/or firmware updates. While operating up to 48 MHz, the PIC18F2550 is also mostly software and hardware compatible with the PIC16C745 Low-Speed USB OTP devices. THE PICSTART® Plus does NOT currently support this device but may support it in the future.

Features 
Full Speed USB 2.0 (12Mbit/s) interface
  • 1K byte Dual Port RAM + 1K byte GP RAM
  • Full Speed Transceiver
  • 16 Endpoints (IN/OUT)
  • Internal Pull Up resistors (D+/D-)
  • 48 MHz performance (12 MIPS)
  • Pin-to-pin compatible with PIC16C7X5
Parameter Name  Value
 Program Memory Type  Flash
 Program Memory (KB)  32
 CPU Speed (MIPS)  12
 RAM Bytes  2,048
 Data EEPROM (bytes)  256
 Digital Communication Peripherals  1-A/E/USART, 1-MSSP(SPI/I2C)
 Capture/Compare/PWM Peripherals  2 CCP
 Timers  1 x 8-bit, 3 x 16-bit
 ADC  10 ch, 10-bit
 Comparators  2
 USB (ch, speed, compliance)  1, Full Speed, USB 2.0
 Temperature Range (C)  -40 to 85
 Operating Voltage Range (V)  2 to 5.5
 Pin Count  28

Traje del día

Sé genial con el atuendo del día
SMPIC18F2550
Nuevo

No hay ninguna opinión por el momento.