k0061

ESP8266 KIT METEO

Referencia: K0061
Weather Station IoT Starter Kit gets the current and forecast weather information from an online service and displays the expected conditions on a 128X64 pixels OLED display with nice icons. The program uses a side scrolling carousel to display the date, time. In addition, it displays the information about 3-day forecast temperature and humidity through DHT11 sensor.

Features:

ESP8266 ESP-12E Development Board

  • 802.11 b/g/n protocol 
  • Wi-Fi Direct (P2P), soft-AP 
  • Integrated TCP/IP protocol stack 
  • Integrated TR switch, balun, LNA, power amplifier and matching network 
  • Integrated PLL, regulators, and power management units 
  • +19.5dBm output power in 802.11b mode 
  • Integrated temperature sensor 
  • Supports antenna diversity 
  • Power down leakage current of < 10uA 
  • Integrated low power 32-bit CPU could be used as application processor 
  • SDIO 2.0, SPI, UART 
  • STBC, 1x1 MIMO, 2x1 MIMO 
  • A-MPDU & A-MSDU aggregation & 0.4 s guard interval 
  • Wake up and transmit packets in < 2ms 
  • Standby power consumption of < 1.0mW (DTIM3) 
0.96 128x64 pixel OLED display 
  • Size: 0.96'' 
  • Resolution: 128X64 
  • Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips 
  • Driver IC: SSD1306 
  • Communication: IIC 
  • VCC: 3.3~5V 
  • GND: Ground 
  • SCL: Serial Clock 
  • SDA: Serial Data 
DHT11 Temperature and Humidity Sensor 
  • Digital signal output 
  • VCC: 3.3V~5V 
  • GND: Ground 
  • DATA: MCU IO port 
  • Tips: Do not reverse the VCC and GND, otherwise it will burn! 
Package Including: 
  • 1pcs ESP8266 ESP-12E Development Board
  • 1pcs 0.96 OLED display
  • 1pcs DHT11 Temperature and Humidity Sensor
  • 1pcs 40x10cm female-female jumpers
  • 1pcs USB cable  
22,32 €
27,01 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

Weather Station IoT Starter Kit gets the current and forecast weather information from an online service and displays the expected conditions on a 128X64 pixels OLED display with nice icons. The program uses a side scrolling carousel to display the date, time. In addition, it displays the information about 3-day forecast temperature and humidity through DHT11 sensor.

Features:

ESP8266 ESP-12E Development Board

  • 802.11 b/g/n protocol 
  • Wi-Fi Direct (P2P), soft-AP 
  • Integrated TCP/IP protocol stack 
  • Integrated TR switch, balun, LNA, power amplifier and matching network 
  • Integrated PLL, regulators, and power management units 
  • +19.5dBm output power in 802.11b mode 
  • Integrated temperature sensor 
  • Supports antenna diversity 
  • Power down leakage current of < 10uA 
  • Integrated low power 32-bit CPU could be used as application processor 
  • SDIO 2.0, SPI, UART 
  • STBC, 1x1 MIMO, 2x1 MIMO 
  • A-MPDU & A-MSDU aggregation & 0.4 s guard interval 
  • Wake up and transmit packets in < 2ms 
  • Standby power consumption of < 1.0mW (DTIM3) 
0.96 128x64 pixel OLED display 
  • Size: 0.96'' 
  • Resolution: 128X64 
  • Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips 
  • Driver IC: SSD1306 
  • Communication: IIC 
  • VCC: 3.3~5V 
  • GND: Ground 
  • SCL: Serial Clock 
  • SDA: Serial Data 
DHT11 Temperature and Humidity Sensor 
  • Digital signal output 
  • VCC: 3.3V~5V 
  • GND: Ground 
  • DATA: MCU IO port 
  • Tips: Do not reverse the VCC and GND, otherwise it will burn! 
Package Including: 
  • 1pcs ESP8266 ESP-12E Development Board
  • 1pcs 0.96 OLED display
  • 1pcs DHT11 Temperature and Humidity Sensor
  • 1pcs 40x10cm female-female jumpers
  • 1pcs USB cable  

Traje del día

Sé genial con el atuendo del día
K0061
Nuevo

No hay ninguna opinión por el momento.