tsx00003_featured

MKR RELAY PROTO SHIELD

Referencia: TSX00003
The MKR Relay Proto Shield allows you to easily command relays with your MKR board. The shield provides two on board relays and a small prototyping area if you need to add some other component to your project.

The MKR Relay Protoshield allows you to easily add relays to your MKR board based project.

The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 respectively.

The shield also provides an easy connection by means of screw terminal blocks to A1 to A4 analog inputs, I2C and supply voltages.

  • Operating voltage 3.3V (supplied from the host board)
  • Two relays with NO, COM and NC connections
  • Works with battery powered board
  • 8 positions screw terminal blocks  for easy connections with A1 to A4 Analog input, SCL SDA for I2C, GND and 3.3V output
  • 6 positions screw terminal blocks (NO, COM, NC for each relay)
  • Carry current: 2 A
  • Max. operating voltage: 24 VAC, 50 VDC
  • Max. operating current: 1 A
  • Max. switching capacity: 62.50 VA, 30W
  • Proto area
13,95 €
16,88 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

The MKR Relay Proto Shield allows you to easily command relays with your MKR board. The shield provides two on board relays and a small prototyping area if you need to add some other component to your project.

The MKR Relay Protoshield allows you to easily add relays to your MKR board based project.

The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 respectively.

The shield also provides an easy connection by means of screw terminal blocks to A1 to A4 analog inputs, I2C and supply voltages.

  • Operating voltage 3.3V (supplied from the host board)
  • Two relays with NO, COM and NC connections
  • Works with battery powered board
  • 8 positions screw terminal blocks  for easy connections with A1 to A4 Analog input, SCL SDA for I2C, GND and 3.3V output
  • 6 positions screw terminal blocks (NO, COM, NC for each relay)
  • Carry current: 2 A
  • Max. operating voltage: 24 VAC, 50 VDC
  • Max. operating current: 1 A
  • Max. switching capacity: 62.50 VA, 30W
  • Proto area
TSX00003
Nuevo

No hay ninguna opinión por el momento.