u515902

GIGABIT MICRO USB POE RASPBERR

Referencia: U515902

PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, most Micro USB Security Cameras and Tablets - IEEE 802.3af Compliant

The UCTRONICS gigabit PoE splitter is used to supply power and transfer data to micro USB devices like RPi 3B+ via a single Ethernet cable with the help of an IEEE 802.3af compliant switch or injector. You don't need a separate power supply anymore. It uses no GPIO pins and is thus compatible with any 3b+ case with a fan or add-on 3b+ screen. It has plug-and-play compatibility with 3B+ and makes it easier for deployment, operation and maintenance in embedded and IoT projects.
uctronics Poe splitter u515902 

Features:

  • 5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)
  • PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous models
  • Extend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feet
  • Replace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices
  • Save Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)

Specifications: 

Compliant with IEEE 802.3af 
Isolation: 2.5kV
Input: 802.3af 44-56V Mode A&B 300mA 
Power Output: DC 5V/2A(up to 2.5A) 10W
Data Transfer rate: 10/100/1000 Mbps 
Devices will be detected before poe input 
Power Pin: support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-) 

Package Including
1pcs 48V to 5V Active PoE Splitters Micro USB Power Plug 

14,98 €
18,13 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, most Micro USB Security Cameras and Tablets - IEEE 802.3af Compliant

The UCTRONICS gigabit PoE splitter is used to supply power and transfer data to micro USB devices like RPi 3B+ via a single Ethernet cable with the help of an IEEE 802.3af compliant switch or injector. You don't need a separate power supply anymore. It uses no GPIO pins and is thus compatible with any 3b+ case with a fan or add-on 3b+ screen. It has plug-and-play compatibility with 3B+ and makes it easier for deployment, operation and maintenance in embedded and IoT projects.
uctronics Poe splitter u515902 

Features:

  • 5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)
  • PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous models
  • Extend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feet
  • Replace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices
  • Save Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)

Specifications: 

Compliant with IEEE 802.3af 
Isolation: 2.5kV
Input: 802.3af 44-56V Mode A&B 300mA 
Power Output: DC 5V/2A(up to 2.5A) 10W
Data Transfer rate: 10/100/1000 Mbps 
Devices will be detected before poe input 
Power Pin: support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-) 

Package Including
1pcs 48V to 5V Active PoE Splitters Micro USB Power Plug 

U515902
Nuevo

No hay ninguna opinión por el momento.