bth07

MODULO BLUETOOTH HC06 C.I.

Referencia: BTH07/HC06

 

Description

The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.
The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires.
Unit comes without a connector. Please see related male and female pins below.
And now, we provide HC-05/06, HC-05 could be setting to Master or Slave by user. HC-06 just be Master or Slave, that could be customized. This module default is HC-06 with Slave mode.
Note:Be paired must Master devices and Slave devices each other.Master and Master devices, Slave and Slave devices can't paired each other. The HC-06(just suppy slave mode and more easy) Slave mode could paired with PDA, PC etc.
Dimensions: 15.2x35.7x5.6mm

Note:Be paired must Master devices and Slave devices each other.Master and Master devices, Slave and Slave devices can't paired each other. The Slave mode could paired with PDA, PC etc.

7,98 €
9,66 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

 

Description

The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.
The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires.
Unit comes without a connector. Please see related male and female pins below.
And now, we provide HC-05/06, HC-05 could be setting to Master or Slave by user. HC-06 just be Master or Slave, that could be customized. This module default is HC-06 with Slave mode.
Note:Be paired must Master devices and Slave devices each other.Master and Master devices, Slave and Slave devices can't paired each other. The HC-06(just suppy slave mode and more easy) Slave mode could paired with PDA, PC etc.
Dimensions: 15.2x35.7x5.6mm

Note:Be paired must Master devices and Slave devices each other.Master and Master devices, Slave and Slave devices can't paired each other. The Slave mode could paired with PDA, PC etc.

BTH07/HC06
Nuevo

No hay ninguna opinión por el momento.