28pins

I/SP MCU FLASH 10-BIT ADC NWT

Referencia: PIC18F2520
Features 
CPU
  • Up to 10 MIPS performance
  • C compiler optimized RISC architecture
  • 8 x 8 Single Cycle Hardware Multiply
System
  • Internal oscillator support 31 kHz to 8 MHz
  • Fail-Safe Clock Monitor â allows safe shutdown if clock fails
  • Watchdog Timer with separate RC oscillator
  • Wide operating Voltage range; 2.0V to 5.5V
nanoWatt Power Managed Modes
  • Run, Idle and Sleep modes
  • Idle mode currents down to 5.8uA typical
  • Sleep mode currents down to 0.1uA typical
Analog Features
  • 10-bit ADC, 10 channels, 100K samples per second
  • Programmable Low Voltage Detection Module
  • Programmable Brown-out Reset module
  • Two Analog comparators with input multiplexing
Peripherals
  • Master Synchronous Serial Port supports SPI ⢠and I2C⢠Master and Slave Mode
  • EUSART module including LIN bus support
  • Four Timer Modules
  • Up to 2 PWM outputs
  • Up to 2 Capture / Compare
Parameter Name  Value
 Program Memory Type  Flash
 Program Memory (KB)  32
 CPU Speed (MIPS)  10
 RAM Bytes  1,536
 Data EEPROM (bytes)  256
 Digital Communication Peripherals  1-A/E/USART, 1-MSSP(SPI/I2C)
 Capture/Compare/PWM Peripherals  2 CCP
 Timers  1 x 8-bit, 3 x 16-bit
 ADC  10 ch, 10-bit
 Comparators  2
 Temperature Range (C)  -40 to 125
 Operating Voltage Range (V)  2 to 5.5
 Pin Count  28
6,33 €
7,65 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

Features 
CPU
  • Up to 10 MIPS performance
  • C compiler optimized RISC architecture
  • 8 x 8 Single Cycle Hardware Multiply
System
  • Internal oscillator support 31 kHz to 8 MHz
  • Fail-Safe Clock Monitor â allows safe shutdown if clock fails
  • Watchdog Timer with separate RC oscillator
  • Wide operating Voltage range; 2.0V to 5.5V
nanoWatt Power Managed Modes
  • Run, Idle and Sleep modes
  • Idle mode currents down to 5.8uA typical
  • Sleep mode currents down to 0.1uA typical
Analog Features
  • 10-bit ADC, 10 channels, 100K samples per second
  • Programmable Low Voltage Detection Module
  • Programmable Brown-out Reset module
  • Two Analog comparators with input multiplexing
Peripherals
  • Master Synchronous Serial Port supports SPI ⢠and I2C⢠Master and Slave Mode
  • EUSART module including LIN bus support
  • Four Timer Modules
  • Up to 2 PWM outputs
  • Up to 2 Capture / Compare
Parameter Name  Value
 Program Memory Type  Flash
 Program Memory (KB)  32
 CPU Speed (MIPS)  10
 RAM Bytes  1,536
 Data EEPROM (bytes)  256
 Digital Communication Peripherals  1-A/E/USART, 1-MSSP(SPI/I2C)
 Capture/Compare/PWM Peripherals  2 CCP
 Timers  1 x 8-bit, 3 x 16-bit
 ADC  10 ch, 10-bit
 Comparators  2
 Temperature Range (C)  -40 to 125
 Operating Voltage Range (V)  2 to 5.5
 Pin Count  28

Traje del día

Sé genial con el atuendo del día
PIC18F2520
Nuevo

No hay ninguna opinión por el momento.