DRIVER PARA MOTOR NEMA23

DRIVER PARA MOTOR NEMA23

Referencia: DQ542MA
En stock

48.44
IVA incluido (40.03€ sin IVA)

Stepper Motor Driver DQ542MA

Introduction:
DQ542MA is a type  of two-phase hybrid stepping motor driver, the drive voltage of it is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DQ542MA runs under high speed, is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
 
 
 
Features:
l  High performance, low price
l  Average current control, 2-phase sinusoidal output current drive
l  Supply voltage from 18VDC to 50VDC
l  Opto-isolated signal I/O
l  Overvoltage, under voltage, overcurrent, phase short circuit protection
l  15 channels subdivision and automatic idle-current reduction
l  8 channels output phase current setting
l  Offline command input terminal
l  Motor torque is related to speed, but not related to step/revolution
l  High start speed
l  High holding torque under high speed
 
 
Electrical specification:
 
Input voltage
18-50VDC
Input current
< 4A
Output current
1.0A~4.2A
Consumption
Consumption:80W;  Internal Insurance:6A
Temperature
Working Temperature -10~45?;
Stocking temperature -40?~70?
Humidity
No condensation, no water droplets
gas
Prohibition of combustible gases and conductive dust
weight
300GS

 



*Las fotos del producto no son contractuales y están sujetas a cambios sin previo aviso.