ef03097-jpg

PANTALLA 1.8" LCD/TFT

Referencia: EF03097

TFT LCD module has always been one of the hot products in DIY industry and LCD is basically the necessary products during all projects, at the same time, serial port modules are also the popular ones, because it takes few IO and the usage is simple. This section of the 1.8-inch TFT LCD serial SPI integrated features of compact, SPI interface, fully compatible with popular LCD5110 interface cable sequence, and will replace the increasingly reducing LCD5110.

Feature:

  • TFT01_1.8 SP is a 1.8 SPI TFT LCD Screen Module, 9pins interface, compatible LCD5110 interface. Not just a LCD break but include SD card (2GB),
  • The LCD in the TFT01 is ST7735S. It's a 128 X 160 (resolution), 1.8 inch TFT LCD screen.The LCD has a wide viewing angle, the contrast is also very suitable.
  • The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
  • Replace LCD5110, Support direct plug in ElecFreaks Joystick shield, EFCom, Key Pad Shield etc
  • SDcard use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.

Parameter:

  • LED 3.3V IO and Power Supply pin
  • LED UTFT Support
  • SCL Serial clock input
  • SDA/SDI Serial data input
  • DC:Data/Command selection
  • RST:Reset Low level active
  • CS:Chip Selection,Low level active
  • GND:Ground
  • VDD33:3.3V Power Supply pin
9,00 €
10,89 €
(impuestos excl.)
(impuestos inc.)
Cantidad
Disponible

  Compra Segura

Todos los datos de compra son encriptados y protegidos

  Política de entrega

Envío en 48/72 horas

  Política de devolución

14 días de devolución

TFT LCD module has always been one of the hot products in DIY industry and LCD is basically the necessary products during all projects, at the same time, serial port modules are also the popular ones, because it takes few IO and the usage is simple. This section of the 1.8-inch TFT LCD serial SPI integrated features of compact, SPI interface, fully compatible with popular LCD5110 interface cable sequence, and will replace the increasingly reducing LCD5110.

Feature:

  • TFT01_1.8 SP is a 1.8 SPI TFT LCD Screen Module, 9pins interface, compatible LCD5110 interface. Not just a LCD break but include SD card (2GB),
  • The LCD in the TFT01 is ST7735S. It's a 128 X 160 (resolution), 1.8 inch TFT LCD screen.The LCD has a wide viewing angle, the contrast is also very suitable.
  • The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
  • Replace LCD5110, Support direct plug in ElecFreaks Joystick shield, EFCom, Key Pad Shield etc
  • SDcard use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.

Parameter:

  • LED 3.3V IO and Power Supply pin
  • LED UTFT Support
  • SCL Serial clock input
  • SDA/SDI Serial data input
  • DC:Data/Command selection
  • RST:Reset Low level active
  • CS:Chip Selection,Low level active
  • GND:Ground
  • VDD33:3.3V Power Supply pin
EF03097
Nuevo

No hay ninguna opinión por el momento.